Print out the image and wrap this pic around your finger
In order to print the ring sizer above, be sure that your printer is set to
100%. Make sure that you have not reduced the print size in your printer 'page
setup' area. You can verify that the sizer printed correctly by measuring it
with a ruler; it should measure from A to B: 3 1/2 inches long.
Once you have printed the sizer, follow these directions to find your ring
size:
- Cut out the ring sizer
- Cut a slit for Slot "A"
- With the numbers facing out, wrap the sizer
around the finger where the ring will be worn.
- Pull the pointed end Tab "B" through Slot "A"
until the sizer is snug, making sure to allow size for the knuckle.
- The number aligned with Slot "B" is your ring
size.
- If the measure lands between two numbers your
size is a half size Ex: Between 5 and 6 ring size: 5.5. If half sizes are not
available, order the next largest size.
